If your using an XR9 then you won't be using channel 11. it's gonna be 
channel 4 through 7 in 5MHz incriments.
So you will want to not use anything that overlaps those channels very much.
Channel 6 will not be good, channel 11 and channel 1 will be fine.
I


Kurt Fankhauser wrote:
> So what you are saying is that if I have my 900mhz antenna on channel 11
> (2.4 down-converting to 900) and then I have my 2.4AP on channel 1 that this
> is ok on the same board?
> 
> Kurt Fankhauser
> WAVELINC
> P.O. Box 126
> Bucyrus, OH 44820
> 419-562-6405
> www.wavelinc.com
>  
>  
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf Of George
> Sent: Friday, June 13, 2008 4:42 PM
> To: WISPA General List
> Subject: Re: [WISPA] XR9 separation from other 2.4 stuff
> 
> Kurt
> 
> Your just going to want to stay off the same channel as the xr9 and you 
> will be ok.
> 
> 
> Kurt Fankhauser wrote:
>> It is my understanding that the 900mhz cards are actually 2.4ghz with
>> converters built in. So obviously putting a 900mhz card on the same board
> as
>> a 2.4ghz card would be a bad idea. Now can I put them on the same tower?
>> Lets say I put the 900mhz radio at the bottom and run some coax since
> 900mhz
>> should have much less cable loss I should be able to do this. I'll leave
> the
>> 2.4 stuff up top. But will the 900mhz antenna mounted in close proximity
> to
>> the 2.4 antenna pick up the 2.4 and allow it to still cause interference
> to
>> the radio below? Also would putting a 900mhz filter before the radio solve
>> this?
>>
>>  
>>
>> Kurt Fankhauser
>> WAVELINC
>> P.O. Box 126
>> Bucyrus, OH 44820
>> 419-562-6405
>> www.wavelinc.com
>>
>>  
>>
>>  
>>
>>  
>>
>>
>>
>>
> ----------------------------------------------------------------------------
> ----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>>
> ----------------------------------------------------------------------------
> ----
>>  
>> WISPA Wireless List: [email protected]
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
> 
> 
> 
> ----------------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> ----------------------------------------------------------------------------
> ----
>  
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/
> 
> 
> 
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>  
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to