no WDS and no Bridging involved. Using MT ping utility from either end. I have swapped out CM9 radios and gone to a 'clean' rb133 with the same ros2.9.50 as the AP.
I moved the client closer and noticed one ODD thing. With -72db on both sides or even with -62db, the Registered rate is always 1M? yes, this is 802.11a, yes the radios are set to 5.8G. The 'default' rates are selected for radios on each end. Any ideas?? On 7/1/08, Mac Dearman <[EMAIL PROTECTED]> wrote: > 1. Kill all encryption on both ends, get them to pass traffic and then > proceed with enabling encryption. > 2. be sure you have WDS in the bridge or have both sides set to dynamic & > bridge1 (or whatever it is) > 3. Be sure of your gateway on both sides (this is generally the easiest to > jack up) > > Mac > > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of rabbtux rabbtux > > Sent: Tuesday, July 01, 2008 7:50 PM > > To: WISPA General List > > Subject: Re: [WISPA] help! replacement MT based 5.8G system connects, > > but no ping! > > > > IP address on singel CM9 radio interface. Just Swapped out the pre > > configured RB333 system with a clean RB133 and freshly configured to > > the other AP. Still, it associates with encryption key, but no ping! > > (hope I still have hair by morning :-) > > > > On 7/1/08, Mark Nash <[EMAIL PROTECTED]> wrote: > > > Are the IP addresses on a bridge or an Interface? > > > > > > Mark Nash > > > UnwiredWest > > > 78 Centennial Loop > > > Suite E > > > Eugene, OR 97401 > > > 541-998-5555 > > > 541-998-5599 fax > > > http://www.unwiredwest.com > > > > > > ----- Original Message ----- > > > From: "rabbtux rabbtux" <[EMAIL PROTECTED]> > > > To: "WISPA General List" <[email protected]> > > > Sent: Tuesday, July 01, 2008 5:18 PM > > > Subject: [WISPA] help! replacement MT based 5.8G system connects,but > > no > > > ping! > > > > > > > > > > All, > > > > > > > > I'm at wits end as my network is crippled and I'm having problems > > > > getting the replacement system to talk. Both systems have the > > correct > > > > security key, as they will not register to each other correctly > > > > without it. The new system is ros3.9 and it is PTP with another > > > > ros2.9.50 system. These two systems connect with 65dbm signal > > > > strength but I can't ping from either end. I, of course > > double/triple > > > > checked interface IPs and masks. I have used MT for about a year > > and > > > > a half, without issue, however, I'm probably missing something > > here as > > > > I work with looming customer calls about when will the replacement > > > > system be up! > > > > > > > > Anyway, It would be great to speak to someone with more MT > > experience > > > > than myself on this one! Please hit me off list for details. > > > > > > > > Thank you kindly, > > > > Marshall Craw > > > > Rabbit Meadows Tech. > > > > > > > > > > > > > > > ------------------------------------------------------------------- > > ------------- > > > > WISPA Wants You! Join today! > > > > http://signup.wispa.org/ > > > > ------------------------------------------------------------------ > > -------------- > > > > > > > > WISPA Wireless List: [email protected] > > > > > > > > Subscribe/Unsubscribe: > > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------------- > > ------------ > > > WISPA Wants You! Join today! > > > http://signup.wispa.org/ > > > -------------------------------------------------------------------- > > ------------ > > > > > > WISPA Wireless List: [email protected] > > > > > > Subscribe/Unsubscribe: > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > ----------------------------------------------------------------------- > > > --------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > ----------------------------------------------------------------------- > > --------- > > > > WISPA Wireless List: [email protected] > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > No virus found in this incoming message. > > Checked by AVG. > > Version: 8.0.101 / Virus Database: 270.4.3/1528 - Release Date: > > 7/1/2008 7:26 AM > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
