There is no default IP. You can use a null modem cable to plug into the serial port. Use Hyperterminal or putty to get into it. set the bit rate to 115200 and you should be able to put an IP on it from the command line.
/ip address add address=x.x.x.x/x interface=ether1 If your having trouble with winbox make sure you have the latest version. You can get it from MT website. Be sure windows firewall is off and all other interfaces are disabled in your connection properties. Jim 314-565-6863 Blair Davis wrote: > Blair Davis wrote: > >> Anyone happen to know the Power Supply voltage for the old RouterBoard >> 112? Just got some of them and I can't find it on the RouterBoard >> ste.... Thanks. >> >> >> > Thanks all. > > So, now I've got them powered up, but the neighbor discovery in winbox > doesn't find them. > > So now I'm looking for the default IP for them... > > Thanks again... > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
