I am running 4.0.27 on hardware revision A (it's been in the air a while now. I'm on the cleanest channel available, I can't switch to H-pol, mainly, just a lot of work to switch out 50 some users. Also we use H-pol mainely for our point-to-point gear. The funny thing is I have another 5.8 sector at the same site (VL) that does not have this problem and the site surveys just as much noise if not more.... I have tried the new 5.0.18 firmware on other sites and did not see any difference on hardware B or older, so I have not bothered to change those sites out yet.
-Cameron -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ryan Langseth Sent: Thursday, July 10, 2008 11:19 AM To: WISPA General List Subject: Re: [WISPA] Alvarion VL issue What firmware are you running? the 5.0.18 is supposed to handle noise better. I have been told to turn off automatic noise immunity on our VL. In our case it did help some. Have you run a Spectrum Analysis with the AU? find the quietest channel. Run a real SA, check h-pol too. Ultimately we switched to H-pol on our VL, way less noise. Ryan Cameron Kilton wrote: > I have a 5.8ghz sector running in a fairly nosing environment. From time > to time, it stops pass data. I'm able to telnet into this device and see > associations, but I cannot ping the or telnet to the client SU's until I > reboot the AU-VL. > > Anybody have any good ideas. I've done some of the easy stuff, change > freq, new IDU but no luck so far. > > Thank You, > Cameron Kilton > Broadband Department > Assistant Systems Administrator > Midcoast Internet Solutions > http://www.midcoast.com/ > [EMAIL PROTECTED] > (207)594-8277 ext. 108 > ------------------------------------------ > -- This e-mail message may contain material that is confidential or > proprietary to Midcoast Internet Solutions. If you are not the intended > recipient(s) or the employee or agent responsible for delivery of this > message to the intended recipient(s), you are hereby notified that any > dissemination, distribution or copying of this e-mail message is > strictly prohibited. If you have received this message in error, please > immediately notify the sender, destroy all copies of this message, and > delete this message from your computer. -- > ------------------------------------------- > > > > > ------------------------------------------------------------------------ -------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ------------------------------------------------------------------------ -------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Ryan Langseth System Administrator InvisiMax email: [EMAIL PROTECTED] phone: 218.745.6030 Cell: 701.739.1577 ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
