I did not know that. Can anyone suggest a good FAQ/Intro resource for someone just getting into licensed backhauls? Or a collection of links so I can RTFM?
On Thu, Jul 10, 2008 at 11:35 AM, Brad Belton <[EMAIL PROTECTED]> wrote: > Doesn't 11Ghz have a 4' minimum or was that changed? > > Last rumor I heard was you might be able to get a 3' or possibly even a 2' > approved for 11GHz, but if it becomes a problem then you'll be forced to > change to an antenna that doesn't cause a problem with a tighter > pattern...like 4'. > > Best, > > > Brad > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of [EMAIL PROTECTED] > Sent: Thursday, July 10, 2008 11:26 AM > To: WISPA General List > Subject: Re: [WISPA] Dragonwave antenna pattern for RM > > Regs are 6' minimum high performance dish at 6 GHz unless something changed > recently. > > At 11 Ghz you should be able to get 99.99 and use the 5 Ghz to back it up > Sent from my Verizon Wireless BlackBerry > > -----Original Message----- > From: "Jonathan Auer" <[EMAIL PROTECTED]> > > Date: Thu, 10 Jul 2008 11:17:07 > To: WISPA General List<wireless@wispa.org> > Subject: Re: [WISPA] Dragonwave antenna pattern for RM > > > Not really. The biggest I can use are 3' > > On Thu, Jul 10, 2008 at 11:14 AM, <[EMAIL PROTECTED]> wrote: >> Do you have facilities to mount 6' antennas at any real height?? >> >> You may be able to get away with 11 GHz... >> >> Bob >> Sent from my Verizon Wireless BlackBerry >> >> -----Original Message----- >> From: "Jonathan Auer" <[EMAIL PROTECTED]> >> >> Date: Thu, 10 Jul 2008 10:57:06 >> To: WISPA General List<wireless@wispa.org> >> Subject: [WISPA] Dragonwave antenna pattern for RM >> >> >> Does anyone have a Radio Mobile antenna pattern for the Dragonwave >> Horizon Compact? >> Is there a better tool/method for figuring out if the 6+Ghz licensed >> freqs are appropriate for a link? >> >> I could be barking up the wrong tree with this... Are the higher freq >> licensed links appropriate for ~15-25 mile links? >> At the moment I'm using PTP600s and AN-50es to do the job but I can't >> get the speed I'd like because of noise floor. >> >> >> -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
