Could also be something traveling down your cat5 into the unit and creating havoc.
These types of problems are more likely at high powered sites than harmonics. Try another unit if possible. Verify good grounding and bonding practices. Good luck Bob Sent from my Verizon Wireless BlackBerry -----Original Message----- From: "3-dB Networks" <[EMAIL PROTECTED]> Date: Thu, 7 Aug 2008 20:56:56 To: 'WISPA General List'<wireless@wispa.org> Subject: [WISPA] Harmonic Frequencies I understand the principle of harmonic frequencies, but in this case I'm not sure about the application... I've got a Canopy SM mounted to the control building of a 1000ft communications tower. SM has odd jitter/spectrum analysis readings. Tower engineers claim nothing on the tower is operating close to the 5GHz band (the AP is on 5.275GHz). No other customers in the area are having any issues at all. The only thing the tower engineer could think of was that he has a transmitter operating on 566MHz at 30kilowatts of power. Harmonics should be 5.094GHz and 5.660GHz that would be near the band. So my question is, could my source of interference be that transmitter? Or am I missing something else altogether. Daniel White 3-dB Networks -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
