I have seen it occationally on this tower and others but this one is really bad. I'm planning on replacing the WRAP with a WAR or Mikrotik. Hopefully that helps.
Thanks! -RickG On Sun, Feb 22, 2009 at 10:51 PM, Mark Nash <[email protected]> wrote: > Rick, we have had a problem with a couple of StarOS APs where all the > associations stop passing data. You reboot (maybe a couple times) and it > comes back as normal. We originally thought it was a problem with the > hardware, then we replaced all the hardware (the site had original WAR4 > with > SR9). Then after we replaced it with a WAR4-WP188 board & brand new SR9, > the problem was still happeneing. > > We haven't had the problem in a few weeks now after upgrading to the latest > firmware (1.4.10b). > > Mark Nash > UnwiredWest > 78 Centennial Loop > Suite E > Eugene, OR 97401 > 541-998-5555 > 541-998-5599 fax > http://www.unwiredwest.com > ----- Original Message ----- > From: "RickG" <[email protected]> > To: "WISPA General List" <[email protected]> > Sent: Sunday, February 22, 2009 7:23 PM > Subject: [WISPA] tower issue > > > > OK, here a good one! (aka, how I spent my weekend in a blizzard!) > > > > One of my towers has a single WARP/StarOS connected to a 5GHz grid for > > backhaul and a 15dBi omni for the local connections. > > On Saturday, after making some small changes, I rebooted it and it would > > not > > allow me to connect via wireless any longer - or my customers :( > > So, I go to the tower, connect up via ethernet and everything is a usual > > but > > I see all associations but only a few client have ip addresses. I can > ping > > the few clients but the packet loss is huge 80-90%. I then reload my > > backup > > but still get the same thing. I try changing channels, but still the > same. > > I > > then systematically begin replacing parts starting with the radio card. > > Eventually, I replaced EVERYTHING but still have the problem. One note: > > occasionally, twice of maybe three times, after a reboot, all came back > > normal. The third time, I left well enough alone for now but of course, > > you > > know what will happen the next time I reboot. > > > > Any ideas??? > > > > -RickG > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: [email protected] > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
