No it's turned off on all the interfaces. I am beginning to think that this board has too many wireless cards in it.....
Kurt Fankhauser WAVELINC P.O. Box 126 Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Gerard Dupont III Sent: Monday, April 20, 2009 8:53 PM To: WISPA General List Subject: Re: [WISPA] is this router overloaded? Are you using Adaptive Noise Immunity? If so, that will cause the cpu to skyrocket on even lightly loaded ap's.. Gerard Kurt Fankhauser wrote: > I have a RB600 here that I've taken a screenshot of. No interfaces are > bridged, everything is routed and I'm noticing some lag in the traffic that > passes though this device during peak use. I suspect that the 41 RIP routes > might have something to do with it as actual throughput isn't that much > sometimes topping out around 8Mbps. Just want to hear from others and if > there is any suggestions on how I might speed this up let me know. CPU usage > on it is around 40-50%. ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
