3.4xx has problems in AP mode, connections will degrade over time. I'm running 3.3.2 right now on all my UBNT AP's, it's stable, except for the site survey bug (everyone reassociates on site survey) and the WPA settings bug, which I know about and avoid.
Hit their forum's, they already have many reports about 3.4 performance degradation. Regards Michael Baird > Though I'd pass this along. I have an NS2 I'm running as AP (Station > AP, Bridge) which has been running for almost two months. I upgraded > to the latest firmware, v3.4rc and then the release version when it > came out. The firmware that was in the unit when I got it (I think it > was v2.???) was unstable but once I upgraded to v3.4rc all was good. > Then the night before last the wireless signal was on and off every 15 > minutes or so. I checked the ethernet connections, power supply > voltage, and all was good but it just kept rebooting. I reflashed the > latest firmware and still had the same problem. So for a test I backed > down to v3.1.1 and all is good and it's been up for 19 hours. > > I started a ticket with Ubnt but haven't heard back yet. > > Greg > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
