Sorry for highjacking the thread but I've got an NS2 I'm testing with a customer that is in router mode. The customer was complaining the connection keeps dropping out and I traced it back to DHCP. The NS2 logs showed it was continuously providing a new ip address to his router. Once I swithed to bridge mode the connection had been stable. Any ideas? -RickG
On Wed, Jul 1, 2009 at 11:41 AM, <[email protected]> wrote: > Though I'd pass this along. I have an NS2 I'm running as AP (Station > AP, Bridge) which has been running for almost two months. I upgraded > to the latest firmware, v3.4rc and then the release version when it > came out. The firmware that was in the unit when I got it (I think it > was v2.???) was unstable but once I upgraded to v3.4rc all was good. > Then the night before last the wireless signal was on and off every 15 > minutes or so. I checked the ethernet connections, power supply > voltage, and all was good but it just kept rebooting. I reflashed the > latest firmware and still had the same problem. So for a test I backed > down to v3.1.1 and all is good and it's been up for 19 hours. > > I started a ticket with Ubnt but haven't heard back yet. > > Greg > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
