Yes, but Cisco switches only do Cisco Prestandard and 802.3af 48 volt. John
Charles Wyble wrote: > On a cisco poe enabled switch can't you just do > > conf t > interface Gig0/0 > shutdown > no shutdown > done > > to power cycle? > > Lots of resellers out there. > > > Jason Hensley wrote: > >> Looking for recommendations on a 10+ port POE switch that will do up to >> 24volt. Prefer remote manageable with options to switch power on and off >> per port (remote reboot per port). >> >> Thanks in advance! >> >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/