The chip on the 411 is different than the one on the 433, the 433 has a
switch chip built in.  We could probably repair the 433/450 as well, but
the chip to repair/replace is significantly more expensive.  I have not
seen as many issues with the 433's blowing, but we seem to blow about
10-20 411's a month out of 700 or so subs using them.

Regards,
Chuck Hogg
Shelby Broadband
502-722-9292
[email protected]
http://www.shelbybb.com


-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Scott Carullo
Sent: Friday, July 31, 2009 10:24 PM
To: WISPA General List
Subject: Re: [WISPA] WTB: MikroTik RB/411 with blown ethernet ports

Man I thrown a bunch of these out. Have to dig through my trash now lol

I assume its the same deal with eth ports on RB450G and others?

Question - Its funny your subject listed the RB411.  I have had LOTS of 
RB411 eth ports blown.  Obviously I'm not the only one or this thread
would 
not have started.  Do you all see the same problems on other
routerboards 
or just the RB411?  I'm curious if I were to use say an RB433 would it
be 
any more resilient to close lightning strikes?  I'd gladly start using
them 
or whatever else might work.  I do have lots of 532's and 133's and they
do 
not seem to have this problem, but I have more RB411's so it could be
just 
statistics...

Opinions?

Scott Carullo
Brevard Wireless
321-205-1100 x102

-------- Original Message --------
> From: "Chuck Hogg" <[email protected]>
> Sent: Friday, July 31, 2009 5:07 PM
> To: "WISPA General List" <[email protected]>
> Subject: [WISPA] WTB: MikroTik RB/411 with blown ethernet ports
> 
> If you have any RB/411's that boot up, but have blown Ethernet ports,
I
> will buy them from you.
> 
>  
> 
> $5/board if you don't want it back
> 
> $20/board if you would like it repaired and sent back to you.
> 
>  
> 
> Some boards that we have been receiving cannot be repaired due to a
> direct lightning strike.  They must be bootable, but without link.
> Please contact me off-list for further details.
> 
>  
> 
> Regards,
> 
> Chuck Hogg
> 
> Shelby Broadband
> 502-722-9292
> [email protected]
> 
> http://www.shelbybb.com
> 
>  
> 
> 
> 
> 
------------------------------------------------------------------------
----
----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> 
------------------------------------------------------------------------
----
----
>  
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/ 




------------------------------------------------------------------------
--------
WISPA Wants You! Join today!
http://signup.wispa.org/
------------------------------------------------------------------------
--------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to