OUCH! Now that is a high failure rate.

Not a big deal as its the one, but very annoying issue  when it first came up.
The ping watchdog was on the #2 port. The weather was good so I am really
thinking/hope its spiders. If not oh well, its the only non obvious board
failure in 5 years. The rest were easy to spot where the magic smoke was 
released.

Jeromie

Chuck Hogg wrote:
> The chip on the 411 is different than the one on the 433, the 433 has a
> switch chip built in.  We could probably repair the 433/450 as well, but
> the chip to repair/replace is significantly more expensive.  I have not
> seen as many issues with the 433's blowing, but we seem to blow about
> 10-20 411's a month out of 700 or so subs using them.
> 
> Regards,
> Chuck Hogg
> Shelby Broadband
> 502-722-9292
> [email protected]
> http://www.shelbybb.com
> 
> 
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of Scott Carullo
> Sent: Friday, July 31, 2009 10:24 PM
> To: WISPA General List
> Subject: Re: [WISPA] WTB: MikroTik RB/411 with blown ethernet ports
> 
> Man I thrown a bunch of these out. Have to dig through my trash now lol
> 
> I assume its the same deal with eth ports on RB450G and others?
> 
> Question - Its funny your subject listed the RB411.  I have had LOTS of 
> RB411 eth ports blown.  Obviously I'm not the only one or this thread
> would 
> not have started.  Do you all see the same problems on other
> routerboards 
> or just the RB411?  I'm curious if I were to use say an RB433 would it
> be 
> any more resilient to close lightning strikes?  I'd gladly start using
> them 
> or whatever else might work.  I do have lots of 532's and 133's and they
> do 
> not seem to have this problem, but I have more RB411's so it could be
> just 
> statistics...
> 
> Opinions?
> 
> Scott Carullo
> Brevard Wireless
> 321-205-1100 x102
> 
> -------- Original Message --------
>> From: "Chuck Hogg" <[email protected]>
>> Sent: Friday, July 31, 2009 5:07 PM
>> To: "WISPA General List" <[email protected]>
>> Subject: [WISPA] WTB: MikroTik RB/411 with blown ethernet ports
>>
>> If you have any RB/411's that boot up, but have blown Ethernet ports,
> I
>> will buy them from you.
>>
>>  
>>
>> $5/board if you don't want it back
>>
>> $20/board if you would like it repaired and sent back to you.
>>
>>  
>>
>> Some boards that we have been receiving cannot be repaired due to a
>> direct lightning strike.  They must be bootable, but without link.
>> Please contact me off-list for further details.
>>
>>  
>>
>> Regards,
>>
>> Chuck Hogg
>>
>> Shelby Broadband
>> 502-722-9292
>> [email protected]
>>
>> http://www.shelbybb.com
>>
>>  
>>
>>
>>
>>
> ------------------------------------------------------------------------
> ----
> ----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>>
> ------------------------------------------------------------------------
> ----
> ----
>>  
>> WISPA Wireless List: [email protected]
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/ 
> 
> 
> 
> 
> ------------------------------------------------------------------------
> --------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> ------------------------------------------------------------------------
> --------
>  
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/
> 
> 
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>  
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to