We have a couple of 900MHz system, I'd hate to say it, but seems like interference to me. I've never seen a bad config cause latency to shoot up. The only other possibility is a bad Ethernet interface, check auto negotiation on your switch and look to see if you're getting any physical errors such as CRC or collisions.
I agree, these things suck if anything starts interfering with them. We use them sparingly and then keep our fingers cross that nothing pops up using 900MHz. On Thu, 2009-08-06 at 09:09 -0500, John Scrivner wrote: > We have a couple of sectors of 900 MHz Tranzeo which were running fine > previously but seem to experience enormous latency at times now. I am > talking about upwards of 5000 milliseconds (5 full seconds) for a return on > a ping. It is intermittent. I am guessing interference but was wondering if > anyone had seen anything else cause this. We have had limited success in > dealing with interference in 900 MHz previously so we are hoping there is > something else we can try before completely bailing on the band in those > locations. Any ideas are appreciated. > John Scrivner > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
