|
Yes, I have a "test" set of the MT with the R52n card. I was able to do
55Mbps of actual TCP throughput with a single antenna using RB411
boards. So, for about $200 for a complete link (plus antennas), you can
have a 50Mbps ptp link using a single 20mhz channel (and single
polarity). I also saw the same results with the Bullet5M units. They are easy, fast and should work very well for point to point links. Travis Microserv Scott Carullo wrote: Hey Travis, your feedback is always valued. Thanks for sharing your testing with us. I look forward to hearing about it...Have you had a chance to test some MT MIMO gear out there yet? Scott Carullo Brevard Wireless 321-205-1100 x102 -------- Original Message --------From: "Travis Johnson" <[email protected]> Sent: Tuesday, August 18, 2009 9:27 PM To: "WISPA General List" <[email protected]> Subject: Re: [WISPA] Bullet M5 HP---------------------------------------------------------------------------- ----WISPA Wants You! Join today! http://signup.wispa.org/---------------------------------------------------------------------------- ----WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ |
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
