20mhz channel using dual pol antennas. I'm trying to use an off the shelf
system if you will. I like the Solectek unit, but it does not have
adaptive modulation so for the 13 Mile shot that I have across Ocean where
I can see as much as a 20db drop even with 32db dish antennas. I want to
replace a Trango Link-45 unit with some type of OFDM/MIMO high throughput
system.

Also something like this in 5.4ghz w/DFS2 could be a nice present from the
manufactures.....

-Cameron

> 20 mhz channels?  Single or dual antenna / polarities?
>
> Randy
>
>
> Dennis Burgess wrote:
>> Have a 3 mile shot right now doing 55 TCP :)  R52Ns.
>>
>> -----Original Message-----
>> From: [email protected] [mailto:[email protected]] On
>> Behalf Of Leon D. Zetekoff, NCE
>> Sent: Tuesday, September 01, 2009 5:59 PM
>> To: WISPA General List
>> Subject: Re: [WISPA] 5.8ghz PTP
>>
>> * Josh Luthman wrote, On 9/1/2009 6:31 PM:
>>
>>> 30 megs with a 20 mhz channel is what Travis and I always see in 5ghz.
>>>  Xr5 and r52(h) myself.
>>>
>>>
>> we had almost a 30 mile path using I believe SR5s and I think it was 10
>> mHz channels and I think we topped it at 15m but throttled it back to
>> cap @ 10m (mostly that link was for residential and a few biz).
>>
>> leon
>>
>>> On 9/1/09, Scott Carullo <[email protected]> wrote:
>>>
>>>
>>>> Mikrotik with R52N cards and say a RB411AH
>>>>
>>>> I see almost that much throughput with the regular rb411 boards but
>>>> the cpu i believe is the bottleneck but its close.
>>>>
>>>> Scott Carullo
>>>> Brevard Wireless
>>>> 321-205-1100 x102
>>>>
>>>> -------- Original Message --------
>>>>
>>>>
>>>>> From: "Cameron Kilton" <[email protected]>
>>>>> Sent: Tuesday, September 01, 2009 5:38 PM
>>>>> To: "[email protected]" <[email protected]>
>>>>> Subject: [WISPA] 5.8ghz PTP
>>>>>
>>>>> Anybody know of any equipment for under 5K that can deliver 100Mbit
>>>>> (ish) with Dual Polarity with Adaptive Modulation? (Anything that is
>>>>>
>>
>>
>>>>> not Ubiquiti for now.)
>>>>>
>>>>> Also anybody know when the Rocket M will be shipping?
>>>>>
>>>>> Thank You,
>>>>> Cameron Kilton
>>>>>
>>>>>
>>
>>
>> --------------------------------------------------------------------------------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> --------------------------------------------------------------------------------
>>
>> WISPA Wireless List: [email protected]
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>
> --
> Randy Cosby
> Vice President
> InfoWest, Inc
>
> work: 435-773-6071
> email: [email protected]
>
> http://www.linkedin.com/in/randycosby
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to