Cam,

Are you using WDS for the link?  I hear (and we're going to experiment 
today if I have some time) that WDS on 802.11N doesn't work full speed, 
but that you can set up a normal bridge / station link and run mpls 
across is much more efficiently. 

I do also have a Radwin in the air for a customer who didn't want to pay 
fiber build costs to a new building.  Works as advertised.  Not Mikrotik 
cheap though :)

Randy


c...@midcoast.com wrote:
> 20mhz channel using dual pol antennas. I'm trying to use an off the shelf
> system if you will. I like the Solectek unit, but it does not have
> adaptive modulation so for the 13 Mile shot that I have across Ocean where
> I can see as much as a 20db drop even with 32db dish antennas. I want to
> replace a Trango Link-45 unit with some type of OFDM/MIMO high throughput
> system.
>
> Also something like this in 5.4ghz w/DFS2 could be a nice present from the
> manufactures.....
>
> -Cameron
>
>   
>> 20 mhz channels?  Single or dual antenna / polarities?
>>
>> Randy
>>
>>
>> Dennis Burgess wrote:
>>     
>>> Have a 3 mile shot right now doing 55 TCP :)  R52Ns.
>>>
>>> -----Original Message-----
>>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
>>> Behalf Of Leon D. Zetekoff, NCE
>>> Sent: Tuesday, September 01, 2009 5:59 PM
>>> To: WISPA General List
>>> Subject: Re: [WISPA] 5.8ghz PTP
>>>
>>> * Josh Luthman wrote, On 9/1/2009 6:31 PM:
>>>
>>>       
>>>> 30 megs with a 20 mhz channel is what Travis and I always see in 5ghz.
>>>>  Xr5 and r52(h) myself.
>>>>
>>>>
>>>>         
>>> we had almost a 30 mile path using I believe SR5s and I think it was 10
>>> mHz channels and I think we topped it at 15m but throttled it back to
>>> cap @ 10m (mostly that link was for residential and a few biz).
>>>
>>> leon
>>>
>>>       
>>>> On 9/1/09, Scott Carullo <sc...@brevardwireless.com> wrote:
>>>>
>>>>
>>>>         
>>>>> Mikrotik with R52N cards and say a RB411AH
>>>>>
>>>>> I see almost that much throughput with the regular rb411 boards but
>>>>> the cpu i believe is the bottleneck but its close.
>>>>>
>>>>> Scott Carullo
>>>>> Brevard Wireless
>>>>> 321-205-1100 x102
>>>>>
>>>>> -------- Original Message --------
>>>>>
>>>>>
>>>>>           
>>>>>> From: "Cameron Kilton" <c...@midcoast.com>
>>>>>> Sent: Tuesday, September 01, 2009 5:38 PM
>>>>>> To: "wireless@wispa.org" <wireless@wispa.org>
>>>>>> Subject: [WISPA] 5.8ghz PTP
>>>>>>
>>>>>> Anybody know of any equipment for under 5K that can deliver 100Mbit
>>>>>> (ish) with Dual Polarity with Adaptive Modulation? (Anything that is
>>>>>>
>>>>>>             
>>>       
>>>>>> not Ubiquiti for now.)
>>>>>>
>>>>>> Also anybody know when the Rocket M will be shipping?
>>>>>>
>>>>>> Thank You,
>>>>>> Cameron Kilton
>>>>>>
>>>>>>
>>>>>>             
>>> --------------------------------------------------------------------------------
>>> WISPA Wants You! Join today!
>>> http://signup.wispa.org/
>>> --------------------------------------------------------------------------------
>>>
>>> WISPA Wireless List: wireless@wispa.org
>>>
>>> Subscribe/Unsubscribe:
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>
>>>       
>> --
>> Randy Cosby
>> Vice President
>> InfoWest, Inc
>>
>> work: 435-773-6071
>> email: rco...@infowest.com
>>
>> http://www.linkedin.com/in/randycosby
>>
>>
>>
>> --------------------------------------------------------------------------------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> --------------------------------------------------------------------------------
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>     
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>  
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>   

-- 
Randy Cosby
Vice President
InfoWest, Inc

work: 435-773-6071
email: rco...@infowest.com

http://www.linkedin.com/in/randycosby



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to