Rick...what data rate(s) are you running on the CPE and AP? What speed
is the cust supposed to get? I would use something like 6/9/12/18 data
rates at both ends. The slower the data rate the more headroom you will
have.
Leon
* RickG wrote, On 9/2/2009 8:44 PM:
I've got two customers on a 900MHz AP RB-433/XR9 running Mikrotik
3.10, with a 13db v-pol omni.
Customer 1 has RB-411/XR9 running Mikrotik 3.10, with a 18db grid. 1
mile of solid trees. Signal is -85. Noise floor = -102.
Customer 2 has RB-411/XR9 running Mikrotik 3.10 with a 15db yagi. 1/4
mile solid trees. Signal is -65. Noise floor = -102.
Both customers live with in a mile of each other in the same direction
from the AP.
Customer 1 is complaining about speed. My tests show about 600-1000Kbps.
Customer 2 is working well with 2-3Mbps speeds.
Up until a few weeks ago Customer 1 had near 3Mbps speeds. I lean
towards blaming the foliage but full bloom has long since passed. Any
thoughts?
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.76/2343 - Release Date: 09/03/09
05:50:00
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
