LOL

Not worth it for a $2.00 item.  grin

I really wanted some all-thread for this but couldn't find the right size. 
I figured that would hold on the other cat5 better.
marlon

----- Original Message ----- 
From: "Robert West" <[email protected]>
To: "'WISPA General List'" <[email protected]>
Sent: Monday, October 19, 2009 7:47 AM
Subject: Re: [WISPA] Gotta Have


> Sounds like a sales opportunity, Marlon..........
>
>
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of Marlon K. Schafer
> Sent: Monday, October 19, 2009 10:36 AM
> To: WISPA General List
> Subject: Re: [WISPA] Gotta Have
>
> At a welding shop.  I took a hunk of cat5 cable in and found a welding rod
> that JUST fit inside it.  (pull the outer insulation out .5" or so)
>
> I had to grind a point on both ends and also "rough" up the wire so that 
> it
> would "stick" inside the cable better.  Took a few tries to get right but
> now that I have it nailed down it's soooooo cool.  I don't have to drill a
> bigger hole.  I don't have to fight with the drill flutes to find the hole
> in the end of the drill bit.  It doesn't take two people (one to pull the
> other to feed the wire) etc.
>
> I've also got an 18" one that works great in trailer house floors.  Drill
> the hole in the floor, poke the rod/wire through the insulation below, go
> down, find the rod, wiggle it a bit to enlarge the hole, pull the cat 5 
> down
>
> and off you go.
>
> laters,
> marlon
>
> ----- Original Message ----- 
> From: "Mark McElvy" <[email protected]>
> To: "WISPA General List" <[email protected]>
> Sent: Monday, October 19, 2009 7:19 AM
> Subject: Re: [WISPA] Gotta Have
>
>
>> Where do you get or call those 1ft long wires?
>>
>> Mark McElvy
>>
>>
>>
>> -----Original Message-----
>> From: [email protected] [mailto:[email protected]] On
>> Behalf Of Marlon K. Schafer
>> Sent: Monday, October 19, 2009 9:09 AM
>> To: WISPA General List
>> Subject: Re: [WISPA] Gotta Have
>>
>> Travis,
>>
>> If you'll go through $200 per month in connectors these will save you at
>> least $500 in labor.
>>
>> It takes less than half the time to make a connection and they are NEVER
>> wrong.  These and the Times LMR400 stripper have been some of the best
>> tools I've ever purchased.
>>
>> Those and a 1' long "wire" that slips just inside a cat5 cable so that
>> it can easily be pushed through a wall without getting hung up on the
>> insulation etc.
>>
>> Laters,
>> marlon
>>
>>  ----- Original Message ----- 
>>  From: Travis Johnson
>>  To: WISPA General List
>>  Sent: Sunday, October 18, 2009 2:00 PM
>>  Subject: Re: [WISPA] Gotta Have
>>
>>
>>  These do look great... and I would love to buy them for my
>> installers... but $.50 per connector compared to what I pay now would
>> cost me an extra $200 per month just in connectors. :(
>>
>>  Travis
>>  Microserv
>>
>>  Mike wrote:
>> They DO sell shielded. Part PLT-100020-050
>>  Look further down the list at: www.ezrj45.com
>>
>>
>> At 11:13 AM 10/18/2009, you wrote:
>>  Yeah, those are awesome.  I wish they had shielded connectors as well.
>>
>> marlon
>>
>> ----- Original Message -----
>> From: "Mike" <[email protected]>
>> To: "WISPA General List" <[email protected]>
>> Sent: Sunday, October 18, 2009 7:01 AM
>> Subject: [WISPA] Gotta Have
>>
>>
>>    I have learned a lot from this list.  I think there is some real
>> talent lurking here.  We all have discovered certain things which
>> just make life as a WISP easier.  I think it would be beneficial to
>> list participants in general if there was a thread which contained a
>> description and use of something you find invaluable -- hardware,
>> software etc ... you would like to share with the group.
>>
>> I'll start:
>>
>> what: EZRJ-45 connector system
>> where: www.ezrj45.com
>> why:  As my eyes get older, and especially in low light situations, I
>> find it very difficult to get all those individual conductors on a
>> CAT5 run in the right order while crimping an end.  This is a quite
>> ingenious system.  The plugs have holes all the way through.  You can
>> verify the color code easily BEFORE crimping and cutting the
>> tags.  It takes a special crimp tool which has a pair of blades that
>> cut the tags as it crimps the connector in place.  Maybe not a time
>> saver in my case, but definitely a GRIEF saver.  I've not miswired an
>> Ethernet plug since I started using this system.
>>
>> Mike
>>
>>
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>> --------
>>    WISPA Wants You! Join today!
>> http://signup.wispa.org/
>>
>>
>> ------------------------------------------------------------------------
>> --------
>>    WISPA Wireless List: [email protected]
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>> ------------------------------------------------------------------------
>> --------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> ------------------------------------------------------------------------
>> --------
>>
>> WISPA Wireless List: [email protected]
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>> ------------------------------------------------------------------------
>> --------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> ------------------------------------------------------------------------
>> --------
>>
>> WISPA Wireless List: [email protected]
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>>
>> ------------------------------------------------------------------------
>> ------
>>
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>> --------
>>  WISPA Wants You! Join today!
>>  http://signup.wispa.org/
>>
>> ------------------------------------------------------------------------
>> --------
>>
>>  WISPA Wireless List: [email protected]
>>
>>  Subscribe/Unsubscribe:
>>  http://lists.wispa.org/mailman/listinfo/wireless
>>
>>  Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>> ------------------------------------------------------------------------
>> --------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> ------------------------------------------------------------------------
>> --------
>>
>> WISPA Wireless List: [email protected]
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>>
> ----------------------------------------------------------------------------
> ----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>>
> ----------------------------------------------------------------------------
> ----
>>
>> WISPA Wireless List: [email protected]
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
> ----------------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> ----------------------------------------------------------------------------
> ----
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/ 



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to