On the PAC solids, as I recall, there is a "bump" on the feed that can go into one of two "slots" in the center hole of the dish. When the bump is vertical, the polarity is vertical. When the bump is horizontal, polarity is horizontal.
Cameron Butch Evans wrote: > On Wed, 2009-10-21 at 10:00 -0500, Eje Gustafsson wrote: > >> I cannot on top of my head recall how to determine the installed polarity of >> the feed but will go back to the warehouse to take a quick look to see how >> the feed needs to be installed for vertical and horizontal since it's >> impossible to tell by looking at the head of the feed on these dishes. >> > > It seems to me that when installed as vertical, the 2 bolts will be > vertical (where you bolt the feed to the dish). Rotating it 90 degrees > will make the bolts (and signal polarity) be horizontal . > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
