they work ,very well in-fact. I use them for this purpose,They also have a ping watchdog if u are concerned about stability. I have never had to reboot one with current firmware.
Sent From My I1000 --- On Mon, 10/26/09, Scott Carullo <[email protected]> wrote: From: Scott Carullo <[email protected]> Subject: [WISPA] Ubiquiti NanoStation Loco2 (can i use 2 for bridge?) To: [email protected] Date: Monday, October 26, 2009, 9:23 PM I need a 2Ghz bridge from one building to another, about 10 yards. Can I use two nanostation loco 2 radio to do this? I am unfamiliar with the ubiquity radios... Is there something better I should use? I want cheap but more importantly I want to forget its there (reliable). Speed is not important, 5mb throughput more than enough. I usually use Mikrotik but the rb411 board itself is more than the loco2 if it works. Thanks for info. Scott Carullo Brevard Wireless 321-205-1100 x102 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
