You could probably do that with one radio in WDS mode if I understand you correctly.
On 10/26/09, Scott Carullo <[email protected]> wrote: > I need a 2Ghz bridge from one building to another, about 10 yards. Can I > use two nanostation loco 2 radio to do this? I am unfamiliar with the > ubiquity radios... Is there something better I should use? I want cheap > but more importantly I want to forget its there (reliable). Speed is not > important, 5mb throughput more than enough. I usually use Mikrotik but the > rb411 board itself is more than the loco2 if it works. Thanks for info. > > Scott Carullo > Brevard Wireless > 321-205-1100 x102 > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 "When you have eliminated the impossible, that which remains, however improbable, must be the truth." --- Sir Arthur Conan Doyle -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
