That's what I was thinking and going to ask. Psychic you are. Thanks for the information each of you!
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 "When you have eliminated the impossible, that which remains, however improbable, must be the truth." --- Sir Arthur Conan Doyle On Tue, Oct 27, 2009 at 2:05 PM, Jack Unger <jun...@ask-wi.com> wrote: > Operates from 144 to 148 MHz. When you convert the frequency into > "wavelength" you find that one wavelength is approximately 2 meters. > > jack > > > Josh Luthman wrote: > > Can you please explain "2 meter ham gear"? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > "When you have eliminated the impossible, that which remains, however > improbable, must be the truth." > --- Sir Arthur Conan Doyle > > > On Tue, Oct 27, 2009 at 10:37 AM, Kurt Fankhauser <k...@wavelinc.com> > <k...@wavelinc.com> wrote: > > > > In my experiences with 2 meter ham gear that is around Ethernet there is a > lot of interference from the Ethernet to the ham guys stuff. I've never > seen > the ham guys cause interference though to any wifi gear. > > Ham guys are a whole different breed of folk and depending on how these > ones > your talking to are they may be an invaluable asset to you or they may be > your worst nightmare. The ones around my area are the later and anyone that > gets involved with them end up regretting it later down the road. > > Just my 2 cents, > > Kurt Fankhauser > WAVELINC > P.O. Box 126 > Bucyrus, OH 44820 > 419-562-6405www.wavelinc.com > > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org > <wireless-boun...@wispa.org>] On > Behalf Of Mike > Sent: Tuesday, October 27, 2009 9:17 AM > To: WISPA General List > Subject: [WISPA] Amateur repeater on a wisp tower -- gotchas? > > Wispers: > > I have a 180' tower sitting high on a hill above the county seat. It > has a mix of 5.8 and 2.4 radios and sectors/dishes. We want to > install an amateur repeater on the tower, initially at 70 cm (440MHz > UHF), and eventually a 2 m (144MHz VHF) radio. The dual band antenna > feed point will be at 120'. It is 17' long. There is no microwave > equipment below 160'. > > I don't think there will be any issues with interference either way, > but thought I'd tap into the wealth of knowledge here to see if any > of you has any experience doing anything like this on your towers. > > Is there any mixing at uhf (or VHF) going on in the microwave radio > cards? I can't find specs that even speak of intermediate > frequencies. Gotchas? Hints? Comments? > > Thanks! > > Mike G > > At 06:38 PM 10/26/2009, you wrote: > > > My 24 hours is expiring and I don't want to pull this unit down. > Mikrotik's site wants me to authorize my credit card, a process I've > begun but my credit card company won't post the transaction for a few > days. Can anyone sell me a level 4 license for an x86 machine now? > > Thanks! > Greg > > > > > --------------------------------------------------------------------------- > > > ----- > > > WISPA Wants You! Join today!http://signup.wispa.org/ > > --------------------------------------------------------------------------- > > > ----- > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today!http://signup.wispa.org/ > > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today!http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -- > Jack Unger - President, Ask-Wi.Com, Inc. > Author - "Deploying License-Free Wireless WANs" > Serving the Broadband Wireless Industry Since 1993www.ask-wi.com > 818-227-4220 jun...@ask-wi.com > > Sent from my Pizzicato PluckString... > > > > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/