Should be if not on the back. Shoot www.jeffcosoho.com a call or e-mail me off list and I can get that assembled, tested, built and upgraded for you so all you have to do is plug in and program!
----------------------------------------------------------- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik & WISP Support Services WISPA Vendor Member Office: 314-735-0270 Website: http://www.linktechs.net LIVE On-Line Mikrotik Training Author of "Learn RouterOS" -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jerry Richardson Sent: Thursday, November 19, 2009 6:15 PM To: WISPA General List Subject: [WISPA] MikroTik setup Looking at using MT in a small public WiFi setup. The topology is going to be a 5.7GHz WDS PMP from the top of a 10-story building looking down onto the streets with 2.4 client access at street level. Initially this will not be a mesh but I may implement MT's MME later. My thought is to use a MT411AR + R52 in a 5GHz Rootenna with an N connector installed in the bottom of the enclosure for an Omni. Having never worked with these specific parts I want to make sure there is room in the bottom of the enclosure for a bulkhead mount N connector. Thoughts? Comments? [cid:image001.gif@01CA6932.10980540] Broadband for Business Public and Private WiFi Jerry Richardson VP Operations 925-260-4119 x2 Website<http://www.aircloud.com/> Blog<http://weblog.aircloud.com/> Twitter<http://www.twitter.com/aircloudbband> LinkedIn<http://www.linkedin.com/pub/jerry-richardson/6/372/354> -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
