Yes, I did flash is with 3.5 for Bullet2 but no help. Therefore, I'm guessing the Pico ID on the main page must come from the board itself? Now I wonder if a Pico board will fit into a Bullet? Another strange thing I noticed was it came from the factory with the the 3.4 beta firmware on it. I've never seen a manufacturer ship a unit with put beta before. On the good side, the unit is performing great.
On Fri, Dec 18, 2009 at 6:15 PM, Robert West <[email protected]>wrote: > Must certainly have the wrong firmware from the factory! Have you tried to > flash to the right firmware? I wonder if it will bounce the Bullet > firmware > as being invalid! > > Interesting, Rick. Let us know, that's not fun. > > Bob- > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of RickG > Sent: Friday, December 18, 2009 5:30 PM > To: WISPA General List > Subject: [WISPA] Ubiquiti Bullet2 > > I just configured a Bullet2 that thinks its a Picostation2! See attached. > WTH? > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
