We have used the "old" nano stations for customer owned ptp links, so far so good. But we have not use them for our own network
Gino A. Villarini [email protected] Aeronet Wireless Broadband Corp. 787.273.4143 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mike Sent: Saturday, December 19, 2009 10:35 AM To: WISPA General List Subject: [WISPA] Ubiquiti ready for prime time? I was almost ready to pull the trigger on some Ubiquiti equipment for a new project. The scent of low price is alluring. Then I start reading about connectors pulling out, connectors not soldered on properly, and the wrong boot code on boards. Is it too early? Should I wait a bit before I dive in? Has the haste to get product into the distribution stream compromised quality control? Is the low price just too good to be true? I'd be interested in some constructive thoughts and analysis. Thanks mg ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
