NS2s have been pretty good to me. I've read about issues with the newer product line, but not tried them myself.
On 12/19/09, Philip Dorr <wirel...@judgementgaming.com> wrote: > The rocket dish looks identical to a Pac wireless two foot dish > painted white with a drain hole pre-drilled in the mounting ring and > RP-SMA connectors on the fed horn; Even the same ray dome fits it. > > On Sat, Dec 19, 2009 at 8:05 PM, Robert West <robert.w...@just-micro.com> > wrote: >> I haven't had issues with reboots on the rockets but the bonus with them >> is >> they have a reset button on the PoE down on the ground for when I try >> something stupid from the ground and I screw it up....... I was very glad >> to see that. >> >> But yeah, you should feel okay about the Rockets and the sectors. They >> are >> working fine and I'm sure once I learn how to tweak them a bit more they >> will be perfect. Hey, how else can you get a dual polarity 120 degree >> 19dbi >> sector with a MIMO radio attached for $238 bucks? Just hang it and run >> your >> cat5. Darn quick and the mounts are as robust as you would want. We'll >> see >> how the rest of the unit shapes up after being up for a year. The Rocket >> dish is also a good item. I have some on order, haven't played with it yet >> but I looked one over, very good quality. >> >> Bob- >> >> >> -----Original Message----- >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >> Behalf Of Mike >> Sent: Saturday, December 19, 2009 8:41 PM >> To: Tom Sharples; WISPA General List >> Subject: Re: [WISPA] Ubiquiti ready for prime time? >> >> Thanks Bob, Rick and Tom for your thoughts. >> >> My hands itch when I'm uncertain about something. It might just be >> the dry air. >> >> Are the Ubiquity radios more apt to require reboots than some of the >> other mainstream CPE? Seems to be a common thread here. >> >> I am most interested in the rocket stuff, aren't I? >> >> Tom what sort of radio and board are in the MeshCam2? >> >> >> mg >> >> >> At 02:24 PM 12/19/2009, you wrote: >>>My biggest concern with these units is (a) lack of mechanical robustness - >>>little plastic bits leak or break off quite easily and (b) lack of a >>>hardware watchdog timer which personally I think is essential esp. when >>>you're using "development stage" firmware. We did most of the work to port >>>our Qcode to run on the ubnt platform, but have decided to shelf that >>>project for another year, waiting for things to really settle down. In the >>>CCTV business, there's no-one around to power-cycle the equipment and >>>unrecoverable device hangs are really a disaster. I realize that the ISP >>>business is a little different because the customer can always reboot the >>>CPE! >>> >>>Tom S. >>> >>>----- Original Message ----- >>>From: "Robert West" <robert.w...@just-micro.com> >>>To: <jai...@budget.net>; "'WISPA General List'" <wireless@wispa.org> >>>Sent: Saturday, December 19, 2009 7:55 AM >>>Subject: Re: [WISPA] Ubiquiti ready for prime time? >>> >>> >>> > I'm with ya on all that, Jamie. We've had minor issues but I expected >>> > things to not be perfect, they never are with version 1.0! The trade >> off >>> > is >>> > worth it, for me anyhow. >>> > >>> > Bob- >>> > >>> > >>> > -----Original Message----- >>> > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >>> > Behalf Of jai...@budget.net >>> > Sent: Saturday, December 19, 2009 10:26 AM >>> > To: WISPA General List >>> > Subject: Re: [WISPA] Ubiquiti ready for prime time? >>> > >>> > >>> > We use all UBNT and I have been very happy with the equipment. >>> > Tower has 2 Rocket M5s With 120 sectors, backhaul is Rocket M5s with >>> > the Rocket Dish. CPEs are Nano M5. Durring testing at 4 Miles with >>> > CPE to AP I was able to sustain symmetrical speeds of 75M to our >>> > test server on the other end of the backhaul. I was really amazed at >>> > how well they preformed for the price. I have read all the horror >>> > stories in the UBNT forums but have yet to have one problem. Probably >>> > just cursed myself and should of kept my mouth shut. But so far so >>> > good. >>> > On Sat 12/19/09 6:35 AM , Mike m...@aweiowa.com sent: >>> > I was almost ready to pull the trigger on some Ubiquiti equipment >>> > for >>> > a new project. The scent of low price is alluring. Then I start >>> > reading about connectors pulling out, connectors not soldered on >>> > properly, and the wrong boot code on boards. >>> > Is it too early? Should I wait a bit before I dive in? Has the >>> > haste to get product into the distribution stream compromised >>> > quality >>> > control? Is the low price just too good to be true? I'd be >>> > interested in some constructive thoughts and analysis. >>> > Thanks mg >>> > >>> > >>> >> ---------------------------------------------------------------------------- >>> > ---- >>> > WISPA Wants You! Join today! >>> > http://signup.wispa.org/ >>> > >>> > >>> >> ---------------------------------------------------------------------------- >>> > ---- >>> > WISPA Wireless List: wireless@wispa.org [2] >>> > Subscribe/Unsubscribe: >>> > http://lists.wispa.org/mailman/listinfo/wireless >>> > Archives: http://lists.wispa.org/pipermail/wireless/ >>> > >>> > >>> > Links: >>> > ------ >>> > [1] http://signup.wispa.org/ >>> > [2] mailto:wireless@wispa.org >>> > [3] http://lists.wispa.org/mailman/listinfo/wireless >>> > [4] http://lists.wispa.org/pipermail/wireless/ >>> > >>> > >>> > >>> >> ---------------------------------------------------------------------------- >>> > ---- >>> > WISPA Wants You! Join today! >>> > http://signup.wispa.org/ >>> > >>> >> ---------------------------------------------------------------------------- >>> > ---- >>> > >>> > WISPA Wireless List: wireless@wispa.org >>> > >>> > Subscribe/Unsubscribe: >>> > http://lists.wispa.org/mailman/listinfo/wireless >>> > >>> > Archives: http://lists.wispa.org/pipermail/wireless/ >>> > >>> > >>> > >>> > >>> >> ---------------------------------------------------------------------------- >> ---- >>> > WISPA Wants You! Join today! >>> > http://signup.wispa.org/ >>> > >>> >> ---------------------------------------------------------------------------- >> ---- >>> > >>> > WISPA Wireless List: wireless@wispa.org >>> > >>> > Subscribe/Unsubscribe: >>> > http://lists.wispa.org/mailman/listinfo/wireless >>> > >>> > Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>>--------------------------------------------------------------------------- >> ----- >>> >>> >>> >>>No virus found in this incoming message. >>>Checked by AVG - www.avg.com >>>Version: 8.5.427 / Virus Database: 270.14.114/2574 - Release Date: >>> 12/18/09 >>>19:38:00 >>> >>> >>> >>>--------------------------------------------------------------------------- >> ----- >>>WISPA Wants You! Join today! >>>http://signup.wispa.org/ >>>--------------------------------------------------------------------------- >> ----- >>> >>>WISPA Wireless List: wireless@wispa.org >>> >>>Subscribe/Unsubscribe: >>>http://lists.wispa.org/mailman/listinfo/wireless >>> >>>Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> ---------------------------------------------------------------------------- >> ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> ---------------------------------------------------------------------------- >> ---- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 "The secret to creativity is knowing how to hide your sources." --- Albert Einstein -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/