Just put up our first Apex 11Ghz link. Wondering what everyone does to seal up that port. The manual says you have to hook up the fiber / power port to metal conduit. Do you run conduit all the way back to the base? Do you just use a short piece? Do you put a compression fitting on the end? Use flex? Just curious.
I used a threaded metal 3/4" sweep 90, then capped it off with a Trango AP compression fitting. It's a little heavy though, and I worry about the little screws that hold the 3/4" threaded base plate getting stripped out. -- Randy Cosby Vice President InfoWest, Inc 435-674-0165 x 2010 http://www.infowest.com/ "Letting off steam always produces more heat than light." - Neal A. Maxwell -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/