Correct, but flipping the antenna to the other side of the pole is NOT always an option.
Best, Brad -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, January 13, 2010 6:40 AM To: WISPA General List Subject: Re: [WISPA] Trango Apex Fiber port The problem with the connector only shows itself on 2ft antennas. If you are looking at the mount from behind the antenna, mounting the antenna on the right with a 2ft antenna will cause you to have to bend the cable at 90 degrees right up against the mounting plate. Trango's solution for this is to rotate the antenna to the other side of the mast. My default it mounts on the right side, but you can switch it to the left. Larger or smaller antennas are unaffected. ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
