On 10 February 2010 19:43, Paul Gerstenberger <[email protected]> wrote: > {provider} <---[ static 0.0.0.0/0 xxx.xxx.xxx.xxx ]---> {riverstone ASBR} > <---[10.0.4.1 OSPF Backbone 10.0.4.2]---> {mikrotik} <--- x.x.x.x/24 > public addresses > > I can attach those public addresses directly to the riverstone and they work > fine. However if I attach them to the mikrotik they get advertised over OSPF > and have local connectivity, but they stop at the border router on a > traceroute. However, if you ping a device using one of those addresses from > an external network, you get a response. So I'm missing something to make the > route bi-directional, if that's the right term. > > This is what I have in the Riverstone: > > 325 : ip add route default gateway <provider gateway IP> > 362 : ip-router policy redistribute from-proto static to-proto ospf network > default > 363 : ip-router policy redistribute from-proto direct to-proto ospf network > all > 365 : ospf create area backbone > 367 : ospf add interface WISP-201 to-area backbone > 368 : ospf start
Can you paste `ip route print` and `routing ospf neighbors print` from the Mikrotik, and whatever the Riverstone's equal is? -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
