Hey All, So how do you guys avoid getting water/moisture in your gear?
I'm going to be standing up a 9 end-point network, with some Ubiquiti (Bullet2, Nanostation) gear, Directional & H-Pol Omni antennas, Polyphasers, Ethernet Lightning Arrestors, etc,. I'm not going to be able to travel to the site again in at least a year; its a rainy part of the world, so I'd like to prevent any damage to the gear as much as possible. Anything I should do to prevent moisture from getting into the gear? Or other protective measures... Teflon on the coax connectors, Electrical Tape on the Edges of the gear? If there was a place I could see some pictures of the implementations that would be good too. -Israel -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
