Does anyone like the pure rubber self vulcanizing tape over the vinyl tape? I like how that doesn't come loose over time.
Greg On Mar 1, 2010, at 1:29 PM, Jerry Richardson wrote: > NS2's and other outdoor radios can take care of themselves. I add a little > seal around the cable exit on the bottom of the cover. The bullets make me a > little nervous - I don't trust the grommet that comes with them - a little > sealer on the back at the cable exit is a good idea. > > This is how I was taught for RF connectors > > 3 layer process: > Layer 1 - 3M Super33 or Super88 electrical tape over the entire connection > extending 2" past the shrink wrap at both ends > Layer 2 - 3M Mastic 2229 over the electrical tape - squeeze repeatedly to > conform all of the seams to one contiguous seal > Layer 3 - 3M Super33 or Super88 over the Mastic - this is to keep the mastic > in place and for UV protection > > http://picasaweb.google.com/aircloud.com/AntennaCoaxSeal# > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Israel Lopez-LISTS > Sent: Monday, March 01, 2010 9:46 AM > To: WISPA General List > Subject: [WISPA] Moisture Abatement Techniques > > Hey All, > > So how do you guys avoid getting water/moisture in your gear? > > I'm going to be standing up a 9 end-point network, with some Ubiquiti > (Bullet2, Nanostation) gear, Directional & H-Pol Omni antennas, > Polyphasers, Ethernet Lightning Arrestors, etc,. I'm not going to be > able to travel to the site again in at least a year; its a rainy part of > the world, so I'd like to prevent any damage to the gear as much as > possible. > > Anything I should do to prevent moisture from getting into the gear? Or > other protective measures... Teflon on the coax connectors, Electrical > Tape on the Edges of the gear? If there was a place I could see some > pictures of the implementations that would be good too. > > -Israel > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
