Can you ping the public address on the 750G from the lan? Can you ping any external public addresses from the 750G? If answer to both is yes, check masq rule on outbound interface and that connection tracking is enabled.
-----Original Message----- From: Greg Ihnen [mailto:[email protected]] Sent: 02 March 2010 23:11 To: WISPA General List Subject: [WISPA] Pulling my hair out with an RB750 I have an RB750 which I'm trying to install. It's not my first. The modem is not acting as a DHCP server so I have to config the WAN port (Eth1 Gateway) manually. When I've configured the modem (using NAT) I can't access or ping the internet. I can ping the modem. So pings get to the modem but not ip address of servers I know on the internet. Anyone have any idea what this could be? I even downloaded a config from a working RB750 I have at another location, edited the config so it was no longer using DHCP on Eth1, manually configured Eth1, and nothing. Again I can ping the modem but nothing beyond it. Thanks in advance. Greg -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
