Did you set the correct default route on the 750? Greg Ihnen wrote: > I have an RB750 which I'm trying to install. It's not my first. The modem is > not acting as a DHCP server so I have to config the WAN port (Eth1 Gateway) > manually. When I've configured the modem (using NAT) I can't access or ping > the internet. I can ping the modem. So pings get to the modem but not ip > address of servers I know on the internet. Anyone have any idea what this > could be? I even downloaded a config from a working RB750 I have at another > location, edited the config so it was no longer using DHCP on Eth1, manually > configured Eth1, and nothing. Again I can ping the modem but nothing beyond > it. > > Thanks in advance. > > Greg > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > >
-- Scott Reed Sr. Systems Engineer GAB Midwest 1-800-363-1544 x4000 Cell: 260-273-7239 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
