What 350mw card are you using? I wouldn't use anything less than XR5 or R5H because their receive sensitivity is so much better. Plus you will use MMCX connectors with these two cards which is going to save you a lot of headaches over u.fl. Also definitely turn on N-stream. I had a link that was bouncing around between 75-90% ccq and couldn't ever get it up higher than that. As soon as I turned on N-stream my ccq went to 100/100%. And modulation locks itself at 54/54 all day long.
Kurt Fankhauser WAVELINC P.O. Box 126 Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Akinlolu Ajayi-Obe Sent: Wednesday, April 28, 2010 2:23 AM To: [email protected] Subject: [WISPA] MT PtP I want to setup an MT point to point using two MT 411 boards, 350mw cards and a 23db rootena. Distance is 7km. Is there anything I need to tweak or watch out for? New to MT. I have setup a basic link and tested in the office. Thanks Akin Sent from my BlackBerryR smartphone ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
