With one radio. So if using one radio, do you add a second antenna to the setup to give you full duplex or how are you setting it all up? I've only seen it running with dual cards so I'm kinda interested in the single card setup.
Bob- -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Wednesday, April 28, 2010 12:04 PM To: WISPA General List Subject: Re: [WISPA] MT PtP I run all my rb411/XR9 setups with nstream. Seams to keep em nice and steady. Steve Barnes Manager PCS-WIN RC-WiFi Wireless Internet Service -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, April 28, 2010 11:59 AM To: 'WISPA General List' Subject: Re: [WISPA] MT PtP Wait, N-Stream will work with non-mikrotik cards? I thought it was locked into only MT cards? Bob- -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, April 28, 2010 11:58 AM To: 'WISPA General List' Subject: Re: [WISPA] MT PtP What about N-stream with 900Mhz? Is that just asking for trouble? Bob- -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Kurt Fankhauser Sent: Wednesday, April 28, 2010 10:23 AM To: aajayi...@as-technologies.com; 'WISPA General List' Subject: Re: [WISPA] MT PtP What 350mw card are you using? I wouldn't use anything less than XR5 or R5H because their receive sensitivity is so much better. Plus you will use MMCX connectors with these two cards which is going to save you a lot of headaches over u.fl. Also definitely turn on N-stream. I had a link that was bouncing around between 75-90% ccq and couldn't ever get it up higher than that. As soon as I turned on N-stream my ccq went to 100/100%. And modulation locks itself at 54/54 all day long. Kurt Fankhauser WAVELINC P.O. Box 126 Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Akinlolu Ajayi-Obe Sent: Wednesday, April 28, 2010 2:23 AM To: wireless@wispa.org Subject: [WISPA] MT PtP I want to setup an MT point to point using two MT 411 boards, 350mw cards and a 23db rootena. Distance is 7km. Is there anything I need to tweak or watch out for? New to MT. I have setup a basic link and tested in the office. Thanks Akin Sent from my BlackBerryR smartphone ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
