I use 20 MHz channels and don't have any I can turn down to get a test at the 
moment. Usually get 4-5 MB at the best.

Steve Barnes
Manager
PCS-WIN
RC-WiFi Wireless Internet Service


-----Original Message-----
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf 
Of Kurt Fankhauser
Sent: Wednesday, April 28, 2010 2:25 PM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP

How much throughput are you getting on the 900mhz with N-stream? 10mhz and
5mhz channels?

 

Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com

 

 

  _____  

From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Blair Davis
Sent: Wednesday, April 28, 2010 1:08 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP

 

Works good for me.

Robert West wrote: 

What about N-stream with 900Mhz?  Is that just asking for trouble?
 
Bob-
 
 
 
-----Original Message-----
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Kurt Fankhauser
Sent: Wednesday, April 28, 2010 10:23 AM
To: aajayi...@as-technologies.com; 'WISPA General List'
Subject: Re: [WISPA] MT PtP
 
What 350mw card are you using? I wouldn't use anything less than XR5 or R5H
because their receive sensitivity is so much better. Plus you will use MMCX
connectors with these two cards which is going to save you a lot of
headaches over u.fl. Also definitely turn on N-stream. I had a link that was
bouncing around between 75-90% ccq and couldn't ever get it up higher than
that. As soon as I turned on N-stream my ccq went to 100/100%. And
modulation locks itself at 54/54 all day long.
 
Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
 
 
 
-----Original Message-----
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Akinlolu Ajayi-Obe
Sent: Wednesday, April 28, 2010 2:23 AM
To: wireless@wispa.org
Subject: [WISPA] MT PtP
 
I want to setup an MT point to point using two MT 411 boards, 350mw cards
and a 23db rootena. Distance is 7km. Is there anything I need to tweak or
watch out for? New to MT. I have setup a basic link and tested in the
office.
 
Thanks
Akin
Sent from my BlackBerryR smartphone
 
 
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: wireless@wispa.org
 
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
 
Archives: http://lists.wispa.org/pipermail/wireless/
 
 
 
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: wireless@wispa.org
 
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
 
Archives: http://lists.wispa.org/pipermail/wireless/
 
 
 
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: wireless@wispa.org
 
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
 
Archives: http://lists.wispa.org/pipermail/wireless/
  

 



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to