We apply Coax-Seal around the cable clamp gland wrapping it out to the 3/8" armored CAT5 cable, but not around the 1/8 turn locking collar. I agree the Apex cable entries are about as chickenshit as we've ever seen, but so far no water issues when additional Coax-Seal is used.
Best, Brad -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Scott Carullo Sent: Thursday, June 10, 2010 10:22 AM To: wireless@wispa.org Subject: [WISPA] Trango APEX data / mgmt cable connection question Those of you that use this equipment do you recommend using the supplied connectors for ethernet only or do you seal around them with additional material like coax seal or similar? I have never liked connectors that have cables enter from the sides into the equipment even with the fancy seal connectors provided. I just don't want to have a problem and was curious what you guys do to keep the water out or if what is provided is sufficient. Thanks for your time. Scott Carullo Brevard Wireless 321-205-1100 x102 ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
