I made one for a 4 wheeler once. It was a 3 30in blades from a old saw mill, bolted into 1. Just made a frame and bearing setup and put in on in place of the snow blade. Used some narrow tube stock to make the feeder behind the blade. We used it to push 1/2 conduit down.
On Thu, Jun 10, 2010 at 8:21 AM, Robert West <robert.w...@just-micro.com> wrote: > All depends on the blade. > > > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Matt > Sent: Thursday, June 10, 2010 11:16 AM > To: WISPA General List > Subject: Re: [WISPA] Burying Cable > >> And I'd return 6 months later to fine the cable still laying on the ground >> in a line of weeds. HA! >> >> But you're right. However.......... People generally piss me off and > will >> screw up the network if given a chance so I do what I can to bullet proof >> them out of the equation the best I can. At least if we bury the cable we >> know the status of the line. >> >> That trencher is the berries. Typical gas edger with a bar that sticks > down >> inside the trench with a cable guide, (Eye bolt) that stuffs the line down >> and a chute to toss the soil up and over the cable. Looks pretty simple >> actually. > > Have not seen an edger that goes over 2 1/4 inches deep though. The > ez trencher says 7 inches deep. > > Matt > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
