..From Wili Mesh Website...
Look at the Supported Platform.. these are pretty much most of the SBC
Mfg. that make a multi radio board for use in outdoor AP.
Regards.
--------
*SUPPORTED HARDWARE*
*Supported CPU architectures:*
Intel IA32
Intel XScale
MIPS
ARM-9
*Supported 802.11 radio modules:*
Based on Atheros chipsets:
AR5004
AR5006
AR2313
AR2316
AR5213
From different vendors:
Ubiquity Networks
SENAO
Z-COM
WISTRON and other
*Supported platforms* (contact [email protected]
<mailto:[email protected]> for details)
ADI Engineering Pronghorn
PC Engines WRAP.2C
Gateworks Avila
Wistron RDAT81
LanReady AP1000
LanReady FN522
LanReady WDR800
Zinwell ZW4400
Faisal Imtiaz
Snappy Internet& Telecom
7266 SW 48 Street
Miami, Fl 33155
Tel: 305 663 5518 x 232
Helpdesk: 305 663 5518 option 2 Email: [email protected]
On 6/21/2010 9:08 AM, Fred Goldstein wrote:
> At 6/21/2010 01:01 AM, you wrote:
>
>>> MicroTik says they have a meshing protocol, HWMPplus, that provides
>>> Layer 2 (this is critical; we're not building a Layer 3 network, and
>>> with this many hops, latency and loss are critical) dynamic meshing,
>>> essentially applying a routing protocol (smarter than bridge STPs)
>>> among nodes.
>>>
>> Have you looked at batman-adv on OpenWRT?
>> http://www.open-mesh.net/wiki/batman-adv
>>
> It looks interesting, at a high level. But is OpenWRT up for use on
> the multi-radio outdoor nodes? The one such vendor that I am aware
> of is UBNT. Since we our contemplating our own long-term solution,
> I'm looking for something that works without a whole lot of work out
> of the box. Configuration, sure; coding, no. So how hard is it to
> run BaTMAN-adv on a RouterStation?
>
> I suppose with three cPCI radio slots on the board and Ethernet that
> could go to an external radio, a decent-sized node, even sectorized,
> could be built out of this class of gear, given some nice packaging.
>
> --
> Fred Goldstein k1io fgoldstein "at" ionary.com
> ionary Consulting http://www.ionary.com/
> +1 617 795 2701
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
