Must solder the static drain wire to the SHIELDED RJ45 connector. The radio has a PLASTIC body. Picks up static like you do when you walk across the carpet in the winter time.
You basically bond everything together then allow a path for the static to go to ground. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Saturday, August 14, 2010 6:11 PM To: WISPA General List Subject: Re: [WISPA] UBNT Grounding What if there is no drain wire? On Aug 14, 2010 6:09 PM, "Jayson Baker" <jay...@spectrasurf.com> wrote: Shielded cable that is not attached properly to the RJ45 will do nothing but pick up MORE static. We solder the drain wire onto the edge of the RJ45 connector after we crimp it on the wire. On Sat, Aug 14, 2010 at 7:49 AM, can...@believewireless.net <p...@believewireless.net> wrote: > > ... ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
