What tool do you use to do this quickly and properly at the top of a 30Ft TV 
tower.

Steve Barnes
General Manager
PCS-WIN<http://www.pcswin.com/>
RC-WiFi Wireless Internet Service<http://www.rcwifi.com/>

From: [email protected] [mailto:[email protected]] On Behalf 
Of Robert West
Sent: Sunday, August 15, 2010 3:32 AM
To: 'WISPA General List'
Subject: Re: [WISPA] UBNT Grounding

Must solder the static drain wire to the SHIELDED RJ45 connector.  The radio 
has a PLASTIC body.  Picks up static like you do when  you walk across the 
carpet in the winter time.

You basically bond everything together then allow a path for the static to go 
to ground.



From: [email protected] [mailto:[email protected]] On Behalf 
Of Josh Luthman
Sent: Saturday, August 14, 2010 6:11 PM
To: WISPA General List
Subject: Re: [WISPA] UBNT Grounding


What if there is no drain wire?
On Aug 14, 2010 6:09 PM, "Jayson Baker" 
<[email protected]<mailto:[email protected]>> wrote:

Shielded cable that is not attached properly to the RJ45 will do nothing but 
pick up MORE static.
We solder the drain wire onto the edge of the RJ45 connector after we crimp it 
on the wire.


On Sat, Aug 14, 2010 at 7:49 AM, 
[email protected]<mailto:[email protected]> 
<[email protected]<mailto:[email protected]>> wrote:
>
> ...



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------

WISPA Wireless List: [email protected]<mailto:[email protected]>

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to