Don't use the 180Degree antenna.

use 2 TR-902-11 they have 55*H and 60*V... should be good to go with 2.

I would also look into a zcomax in a mikrotik or at the least, an EL-900:
<http://www.tranzeo.com/products/radios/EL-900-Series> @ $300 they are not
too bad.

ryan

On Wed, Aug 18, 2010 at 12:38 PM, ~NGL~ <n...@ngl.net> wrote:

> If I replace the 180 degree antenna and replace it with 3 tr-902 -11 what
> spacing do I need between them?
> NGL
>
> --------------------------------------------------
> From: "~NGL~" <n...@ngl.net>
> Sent: Wednesday, August 18, 2010 12:02 PM
> To: "WISPA General List" <wireless@wispa.org>
> Subject: Re: [WISPA] Major Disaster
>
> > Umac when running good this morning around 5.5% now running slow about
> 18%
> > At time getting to AP is ify
> > Firmware is 5.0.5
> >
> >
> > --------------------------------------------------
> > From: "Chris Gotstein" <ch...@uplogon.com>
> > Sent: Wednesday, August 18, 2010 11:49 AM
> > To: "WISPA General List" <wireless@wispa.org>
> > Subject: Re: [WISPA] Major Disaster
> >
> >> We run the Tranzeo 902nf radios as APs and the most we can get on them
> >> is about 10-15 clients.  After that performance declines rapidly.  How
> >> you ever got 50 on there is amazing.  We have since moved to a MT AP
> >> using a zcom gz901 card, and the performance has been much better.
> >> Tranzeo radios just never scale very well.  Had the same issues with
> >> their TR-6000 2.4 APs.  I would reduce the client count down to 20, and
> >> see how the performance is.  What are you seeing on the stats page under
> >> the UMAC tab?  Percentages of failed packets?  Do you have a hard time
> >> getting to the web interface for the AP?  What firmware version on AP
> >> and clients?
> >>
> >> ---- ---- ---- ----
> >> Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
> >> http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
> >>
> >> On 8/18/2010 11:12 AM, Ryan Spott wrote:
> >>> Log into 5 customer radios.
> >>> Change secondary SSID on the CPE to something different from your APs
> >>> SSID.
> >>>
> >>> Change your AP SSID to match this new one.
> >>>
> >>> Do this a few times until you find the problem client(s).
> >>>
> >>> 50 clients is A LOT for a TR902F.
> >>>
> >>> ryan
> >>>
> >>> On Wed, Aug 18, 2010 at 8:05 AM, ~NGL~ <n...@ngl.net
> >>> <mailto:n...@ngl.net>> wrote:
> >>>
> >>>     I have a tower with all Tranzeo equipment.
> >>>     Backhaul to tower is TR-5plus 5.8
> >>>     The AP is TR-902 NF with a 180 degree antenna.
> >>>     50 TR-902-11 as clients
> >>>
> >>>     All was working well until about 10 days ago when we noticed the
> >>>     speeds were starting to decline.
> >>>     Since then it is a nightmare speeds are usually good 3000Mbps up
> and
> >>>     1.2 down]
> >>>     Then during the next 4-5 hour speed decline to about 100k up
> >>>
> >>>     Speeds remain good and constant thru the backhaul
> >>>
> >>>     We have done the following:
> >>>     Changed the AP
> >>>     Rewired the tower
> >>>     Replaced the power to the AP
> >>>
> >>>     Any suggestions as to what problem is.
> >>>
> >>>     We are a small company and this could break us
> >>>     NGL
> >>>
> >>>
> >>>
> >>>
> --------------------------------------------------------------------------------
> >>>     WISPA Wants You! Join today!
> >>>     http://signup.wispa.org/
> >>>
> --------------------------------------------------------------------------------
> >>>
> >>>     WISPA Wireless List: wireless@wispa.org <mailto:wireless@wispa.org
> >
> >>>
> >>>     Subscribe/Unsubscribe:
> >>>     http://lists.wispa.org/mailman/listinfo/wireless
> >>>
> >>>     Archives: http://lists.wispa.org/pipermail/wireless/
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> --------------------------------------------------------------------------------
> >>> WISPA Wants You! Join today!
> >>> http://signup.wispa.org/
> >>>
> --------------------------------------------------------------------------------
> >>>
> >>> WISPA Wireless List: wireless@wispa.org
> >>>
> >>> Subscribe/Unsubscribe:
> >>> http://lists.wispa.org/mailman/listinfo/wireless
> >>>
> >>> Archives: http://lists.wispa.org/pipermail/wireless/
> >>
> >>
> >>
> --------------------------------------------------------------------------------
> >> WISPA Wants You! Join today!
> >> http://signup.wispa.org/
> >>
> --------------------------------------------------------------------------------
> >>
> >> WISPA Wireless List: wireless@wispa.org
> >>
> >> Subscribe/Unsubscribe:
> >> http://lists.wispa.org/mailman/listinfo/wireless
> >>
> >> Archives: http://lists.wispa.org/pipermail/wireless/
> >
> >
> >
> >
> --------------------------------------------------------------------------------
> > WISPA Wants You! Join today!
> > http://signup.wispa.org/
> >
> --------------------------------------------------------------------------------
> >
> > WISPA Wireless List: wireless@wispa.org
> >
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> >
> > Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>

--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to