I have some Nstreme2 ptp's that are using MTI Dual Pol Panel antennas that work great. But now I have a Pacwireless Dual Pol 2ft dish and when I am running with 1 radio in half duplex it works great, and it doesn't matter what polarization - V or H. As long as one pol is running at a time. And this is when I have one pol at 5200 and the other at 5745, so opposite ends of the spectrum. When I enable the nstreme2 the whole connection just struggles.
I have verified that the frequencies are clear and including the immediate adjacent channels. Any Ideas? Oh, I'm using RB433AH's with 2 R5H's on both ends. I'm thinking of changing the RX radios on both sides to a non High power radios, just haven't decided which one. Chris ----- Original Message ----- From: RickG To: WISPA General List Sent: Wednesday, August 18, 2010 12:16 PM Subject: Re: [WISPA] Single radio or multiple radios in the same box? I love UBNT. I've been upgrading backhauls to RocketM's and CPE to BulletM's and/or NanoM's. Customers keep mentioning the network seems faster & faster. The word on the street is we're faster than cable & dsl! The only issue I've had so far is that the legacy radios dont like UBNT AP's. On Wed, Aug 18, 2010 at 10:48 AM, jp <[email protected]> wrote: That UBTik looks pretty cool. Mikrotik rocks for a lot of things, but I don't trust their .N yet. For N I'll stick with Ubnt till I'm overwhelmed with reports of Mikrotik N greatness. On Wed, Aug 18, 2010 at 09:47:22AM -0400, Eric Rogers wrote: > Why not use N radios? If you don't like UBNT Rockets, then look at > Mikrotik 411s with Baltic Networks' Ubitik device. You can buy the UBNT > dual-polarity dishes, but use Mikrotiks on them. > > Eric Rogers > Precision Data Solutions, LLC > (317) 831-3000 x200 > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Jeremie Chism > Sent: Wednesday, August 18, 2010 7:48 AM > To: WISPA General List > Subject: Re: [WISPA] Single radio or multiple radios in the same box? > > There was a discussion here not to long ago about interference with > using two radios in one rb. As I recall there is interference but > someone had a solution. I am sure someone will chime in or you could > check the archive. > > Sent from my iPhone > > On Aug 18, 2010, at 6:42 AM, Paolo Di Francesco > <[email protected]> wrote: > > > Hi all, > > > > in our point-to-point links, we have always used one single radio per > > routerboard and that worked nicely. > > > > Obviously using 2 radios in the same RB (e.g. RB433) is not a bad > idea, > > the cost is lower, but I was wondering if this can lead to some > > interference considering that the radios could be working on adjacent > > channels. > > > > that's why I would appreciate any suggestion about multiple radios on > > the same routerboard. > > > > Thank you in advance > > > > -- > > > > > > Ing. Paolo Di Francesco > > > > Teleinform s.r.l. > > Sede Legale: Via Francesco Paolo Di Blasi 1, 90144 Palermo > > Unita' Operativa: Via Regione Siciliana 49, 90046 Monreale (Palermo) > > Tel: +39-091-6408576, +39-091-6404501 > > Fax: +39-091-6406200 > > > > http://www.wikitel.it > > http://www.teleinform.com > > > > > > > > > > > > > ------------------------------------------------------------------------ > -------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > ------------------------------------------------------------------------ > -------- > > > > WISPA Wireless List: [email protected] > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > ------------------------------------------------------------------------ > -------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ------------------------------------------------------------------------ > -------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -- /* Jason Philbrook | Midcoast Internet Solutions - Wireless and DSL KB1IOJ | Broadband Internet Access, Dialup, and Hosting http://f64.nu/ | for Midcoast Maine http://www.midcoast.com/ */ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------------ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
