We use the UNAT-30+ from Mini-Circuits (usually 3 stacked together) to test "bad" radios that come back, or for PtPs before we send them out. It has been helpful for tuning/benchmarking MikroTik wirelsss settings in a closed environment.
http://www.minicircuits.com/cgi-bin/modelsearch?model=UNAT-30%2B&x=0&y=0 So far we haven't burned anything out. -Kristian On Mon, 2010-08-30 at 22:50 +0200, Paolo Di Francesco wrote: > Hi all > > I was wondering if directly connecting two wireless cards would burn > them. The point is not the power sent by the two cards, but if the > impedance is not the right one. > > Indeed in the "normal use" with the antenna the impedance is not the > same of using a direct cable from one card to another. Not sure what > impedance the "RX" card would show to the "TX" card > > Any idea? I am quite curious. Anybody using this configuration in daily > installations? > > Thank you > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
