We ran into a problem yesterday that caused a large problem, and I'm now quite sure that it was assessed properly, as our network engineer blamed it on RIP not working properly and made the decision to implement BGP for routing at this site. Everywhere else, we're using RIP.
Essentially, we had to move from one tower to another on the same mountaintop. So we bought all new equipment and finished its installation yesterday. 9 APs and 2 backhauls. Using Mikrotik ethernet routers... Now, I'm now sure of the specifics of the problem, and I'm not really interested in asking you all to troubleshoot the problem that we had yesterday. My question is this... Is RIP solid? It's been around for decades, and I used it extensively in the beginning years when I was doing everything. But it seems that we have many problems lately and RIP is being blamed for it. It's a very easy protocol to administer & configure, not too complicated, so I can't imagine so many problems when things are properly configured. I know there are better protocols to use on wireless networks these days, and that there are protocols to use that allow failover to redundant backhauls, etc. That is not my question. When properly configured...Is RIP solid? We have about 900 customers and about 20 tower sites.
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
