Both, you need to run the install wizard on both ends Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143
-----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Eric Merkel Sent: Friday, September 03, 2010 10:52 AM To: WISPA General List Subject: Re: [WISPA] Motorola PTP 600 Link On Fri, Sep 3, 2010 at 10:38 AM, Gino Villarini <g...@aeronetpr.com> wrote: > Your other end is getting hammered at 5772 with a -60 interference. I > would rcommend changing to 15 mhz channels, we usually get more BW on > smaller channels > > Gino A. Villarini > g...@aeronetpr.com > Aeronet Wireless Broadband Corp. > 787.273.4143 > Do you know if the channel size needs to be set on both sides or just on the master before I knock down the link? I can't find this in the docs. -- ========= Eric Merkel ejmerkel.li...@gmail.com ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/