You have to disable the Install wizard first(it only do QPSK), then give it 5 min for the SA to work its magic
Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Eric Merkel Sent: Friday, September 03, 2010 11:10 AM To: WISPA General List Subject: Re: [WISPA] Motorola PTP 600 Link On Fri, Sep 3, 2010 at 10:55 AM, Gino Villarini <g...@aeronetpr.com> wrote: > Both, you need to run the install wizard on both ends > > Gino A. Villarini > g...@aeronetpr.com > Aeronet Wireless Broadband Corp. > 787.273.4143 > Going to 15Mhz channels killed the bandwidth. I suppose I didn't wait long enough for the spectrum analyzer to find the best channel. I think I'd better wait till off hours to try this again. -- ========= Eric Merkel ejmerkel.li...@gmail.com ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/