There is no coax and the antenna is directly grounded to the antenna - pretend it is a one-piece unit instead of two pieces.
Also - the actual transmitted (rf element) is inside the radio. The rest is just a wave guide channeling the RF out and amplifying it. Nothing there but grounded metal parts and air. Scott Carullo Technical Operations 877-804-3001 x102 ---------------------------------------- From: "Marco Coelho" <coelh...@gmail.com> Sent: Friday, September 10, 2010 1:05 PM To: "WISPA General List" <wireless@wispa.org> Subject: [WISPA] 11GHz Licensed dummy I'm looking for some info from anyone out there that has used 11GHz Direct Mount radios before. We're looking at deploying a number of these units with CPR 90G inputs. This means the radio mounts directly to the 6ft or 8ft dish. At the lower freq. of 5 GHz, we use a polyphaser lightning protector between the antenna and the radio. While this adds a little cost, I've never had a radio fail. My question is how do you protect these radios? Thanks Marco -- Marco C. Coelho Argon Technologies Inc. POB 875 Greenville, TX 75403-0875 903-455-5036 ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
