I have not seen mesh done on the cheap however 
but open to some ideas for sure

On Sep 13, 2010, at 7:02 PM, Greg Ihnen wrote:

> Would this be a good application for a mesh network? The towers feeding the 
> town from both sides, and a mesh through out town?
> 
> Greg
> 
> On Sep 13, 2010, at 5:50 PM, Nick White wrote:
> 
>> Hi All,
>> I've got a small town that is literally a 1 mile x 1 mile square. I have 
>> two towers, one is North, 10 miles from the town, the other is East, 11 
>> miles from the town. This town is heavily covered by trees. Most 
>> customers thus far have no LOS to either tower, or are skimming the 
>> tops/sides of trees. Fortunately I'm still able to pull off signals in 
>> the -62 to -80 RX range, using a NBM2 or NSM2 for CPE and Rocket M2 for 
>> AP. My RX signals at the AP are -69 to -84.
>> 
>> I have the possibility to put repeater APs on a radio station tower that 
>> is about 2 blocks from the middle of town - approximately 50' off the 
>> ground. From this tower, no one in town would be more than .75 miles 
>> away. I'm thinking 10Mhz channels - 1, 6, 11. If we do this, I will 
>> likely use the UBNT shields that I've seen for sale with three 120deg 
>> sectors.
>> 
>> Noise levels vary, but there is DSL in town, so a lot of people have 
>> wireless APs in-house. My worst noise level on a customer is -83, but 
>> they're using a NSM2 instead of NBM2. The customers with NBM2 are 
>> typically -100 to -104 noise.
>> 
>> Right now I'm just looking for other's input on these kinds of repeater 
>> situations? Experience with trees? What signal levels through trees, 
>> under 1 mile distance? How about 5.8Ghz or 3.65Ghz? How about CCQ with 
>> trees? I would like to ultimately be able to provide 10+Mbps burstable 
>> service, as there is DSL in this town.
>> 
>> 
>> 
>> 
>> 
>> --------------------------------------------------------------------------------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> --------------------------------------------------------------------------------
>> 
>> WISPA Wireless List: [email protected]
>> 
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>> 
>> Archives: http://lists.wispa.org/pipermail/wireless/
> 
> 
> 
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
> 
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/

_____________________________________________________________________________________
Glenn Kelley | Principle | HostMedic |www.HostMedic.com 
  Email: [email protected]
Pplease don't print this e-mail unless you really need to.


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to